6-9. GEARED HUB REPLACEMENT (Cont'd)
TM 9-2320-387-24-1
Change 1
6-25
NOTE
Ensure outer capscrews are installed from top down and inner
capscrews are installed from bottom up.
8.
Secure lower ball joint (4) to lower control arm (16) with four washers (13), capscrews (14),
washers (13), and locknuts (17). Tighten locknuts (17) to 60 lb-ft (81 N•m).
CAUTION
Do not loosen slotted nut to install cotter pin. Doing this may
result in damage to equipment.
9.
Tighten slotted nut (2) on lower ball joint (4) to 73 lb-ft (99 N•m) and install cotter pin (1).
1
4.1
4.2
4.3
3
4
2
VISE
5
6
7
8
3
9
10
11
12
2
13
4
14
15
16
13
17
18
19
20
21
