6-11. GEARED HUB SPINDLE SEAL REPLACEMENT (Cont’d)
CAUTION
When installing steering arm cover, ensure seal in cover is
aligned on spindle extension. Damage to seal will result.
NOTE
Immediately install steering arm cover after application of sealing
compound.
10.
Clean sealing surfaces on geared hub (1) and steering arm cover (2). Apply anaerobic sealing com-
pound to steering arm cover (2) and install steering arm cover (2) on geared hub (1).
11.
Apply sealing compound to threads of capscrews (4) and install steering arm cover (2) on geared
hub (1) with four washers (3) and capscrews (4). Tighten capscrews (4) to 65 lb-ft (88 N•m).
12.
Remove fill plug (5) and washer (6) from geared hub (1).
13.
Fill geared hub (1) to proper oil level (para. 2-12).
14.
Install washer (6) and fill plug (5) on geared hub (1). Tighten fill plug (5) to 8-13 lb-ft (11-18 N•m).
FOLLOW-ON TASK: Install wheel (para. 8-3).
TM 9-2320-387-24-1
6-34
Change 1
1
2
3
4
1
5
6
