TM9-2320-387-24-l
1 4-63. DIRECTIONAL SIGNAL CONTROL REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
TOOIS
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment
Condition
Battery ground cables disconnected (para. 468).
Maintenance Level
Unit
1 a. Removal
]
1.
Loosen connector nut (6) and remove connector plug (7) from directional signal control (41.
2.
Remove four screws (21 and directional signal control (4) from bracket (1).
rYxz&-l
1.
Place lever (5) to HAZARD position.
2.
Install directional signal control (4) on bracket (1) with four screws (2). Do not tighten screws (2).
3.
Rotate steering wheel, ensuring gauge post (3) mates with directional signal control (41, and
tighten screws (2) to 22-26 (30-35 N-ml.
4.
Install connector plug (7) on directional signal control (4) and tighten connector nut (6).
FOLLOW-ON TASKS: l Connect battery ground cables (para. 4-68).
. Check directional signal control for proper operation (TM 9-2320-387-10X
4-104
