TM 9-2320-387-24-l
4-53. FRONT COMPOSITE LIGHT ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SFTUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two lockwashers (Appendix G, Item 207)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
l Battery ground cables disconnected (para. 4-68).
l Hood raised and secured (TM 9-2320-387-10).
Maintenance Level
Unit
NOTE
Replacement procedures for right and left front composite light
assemblies are basically the same, except left side has four screws
securing closeoff cover and right side has three screws. This
procedure covers the left front composite light.
Prior to removal, tag leads for installation.
a. Removal
1. Remove four screws (11, washers (21, and closeoff cover (3) from hood (4).
2.
Disconnect leads 20 (5),461(12), and 491(11) from hood wiring harness (6).
3.
Remove two capscrews (9), lockwashers (8), ground 92 (7), buss bar (101, and composite light (13)
from hood (4). Discard lockwashers (81.
[I
I.
Install composite light (131, buss bar (101, and ground 92 (7) on hood (4) with two lockwashers (8)
and capscrews (9).
2.
Connect leads 20 (5), 461(12), and 491(11) to hood wiring harness (6).
3.
Install closeoff cover (3) on hood (41 with four washers (2) and screws (1).
4-90
