TM 9-2320-387-24-l
4-52. BLACKOUT DRIVE LIGHT LAMP REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Gasket (Appendix G, Item 62)
Adhesive (Appendix C, Item 12)
Equipment
Condition
Battery ground cables disconnected (para. 468).
Maintenance
Level
Unit
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
pl?GGq
1.
Loosen three retaining screws (2) on light door (6) and remove light door (6) and gasket (3) from
light body (5). Discard gasket (3).
2.
Remove lamp (4) from light body (5).
3.
Clean adhesive from mating surfaces of light door (6) and light body (5).
b. Installation
1.
Install lamp (4) on light body (5).
2.
Install gasket (31 and light door (6) on light body (51 with lens hood (11 at top.
NOTE
To prevent moisture from entering light assembly, tighten all
screws evenly.
3.
Secure light door (6) by tightening three screws (2).
4.
Apply thin coat of adhesive to seam between light body (5) and light door (6).
4-88
