q TM 9-2320-387-24-l 9-9. TOWING PINTLE MAINTENANCE This task covers: a. Removal b. Disassembly c. Cleaning d. Assembly e. Installation INITIAL SETUP: Tools General mechanic’s tool kit: automotive (Appendix B, Item 1) Maintenance and repair shop equipment: automotive (Appendix B, Item 21 nIaterialslParts Two cotter pins (Appendix G, Item 381 Drivescrew (Appendix G, Item 47) ‘Ikvo locknuts (Appendix G, Item 122) Four locknuts (Appendix G, Item 1461 Drycleaning solvent (Appendix C, Item 26) Manual References TM 9-2320-387-10 TM 9-2320-387-24P General Safety Instructions Drycleaning solvent isflammable and will not be used near an open flame. Maintenance Level Unit NOTE Contact DS maintenance for fabrication instructions of optional towing pintle. [I NOTE l Perform steps 1 and 2 for rear-mounted towing pintle. l Perform steps 3 and 4 for optional towing pintle mounted to the front bumper. 1. Remove cotter pin (31, slotted nut (21, washer (4), and towing pintle (9) from rear bumper (7). Discard cotter pin (3). 2. Remove four nuts (11, washers (111, capscrews (101, washers (111, two support plates (61, backing plate (51, and safety chain plate (81 from rear bumper (7). 9-l 1
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business