TM9-2320-387-24-l
9-6. REAR BUMPER BRACE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL
SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Manual References
TM 9-2320-387-24P
Maintenance Level
Unit
Three locknuts (Appendix G, Item 121)
NOTE
Replacement procedures for inner and outer bumper braces are
basically the same. This procedure covers the outer bumper brace.
VI
1.
Remove locknut (51, washer (2), capscrew (11, and washer (2) from rear bumper brace (3) and frame
rail (4). Discard locknut (5).
2.
Remove two locknuts (91, washers (71, capscrews (6), washers (71, and rear bumper brace (3) from rear
.
bumper (8). Discard locknuts (9).
b. Installation
1.
Install rear bumper brace (3) on rear bumper (8) with two washers (71, capscrews (61, washers (71, and
locknuts (9).
2.
Install rear bumper brace (3) on frame rail (4) with washer (2), capscrew Cl), washer (21, and locknut (5).
Tighten locknuts (5) and (9) to 90 lb-R (122 Nom).
9-6
