TM 9-2320-387-24-l
1 O-10. TRANSMISSION MOUNT CROSSMEMBER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Manual References
TM 9-2320-387-24P
Maintenance
Level
Unit
Four locknuts (Appendix G, Item 157)
CAUTION
Transmission must be supported during removal and installation of
transmission mount crossmember to prevent damage to equipment.
-1
1. Place support under transmission (2) and remove two locknuts (6), washers (51, capscrew (41, and
washer (5) from crossmember (7) and two support brackets (1). Discard locknuts (6).
2. Remove two locknuts (9), washers (81, and crossmember (7) from transmission mount (3). Discard
locknuts (9).
b. Installation
1.
2.
3.
Install crossmember (7) on transmission mount (3) with two washers (8) and locknuts (9). Tighten
locknuts (9) to 28 lb-fi (38 Nem).
Install crossmember (7) on two support brackets (1) with washer (5), capscrew (41, two washers (51,
and locknuts (6). Tighten locknuts (6) to 90 lb-ft (122 Nom).
Remove support from under transmission (2).
9-16
