TM 9-2320-387-24-l
L 9-5. RADIATOR FRONT MOUNT BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
hlaintentice
and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Three locknuts (Appendix G, Item 121)
Manual References
TM 9-2320-387-24P
Equipment Condition
Headlight housing removed (para. 10-18).
hlaintenance Level
Unit
r--~
a. Removal
I
1.
Remove locknut (21, two washers (31, capscrew (111, washer (31, spacer (101, mount (41, and
radiator (1) from front mount bracket (9). Discard locknut (2).
2.
Remove two locknuts (121, washers (71, capscrews (61, washers (7), spacers (51, and bracket (9) from
front suspension crossmember
(8). Discard locknuts (12).
[I
1.
Install bracket (9) on front suspension crossmember
(8) with two spacers (51, washers (71, cap-
screws (6), washers (71, and locknuts (12). Tighten locknuts (12) to 90 lb-ft (122 Nom).
2.
Instal .l mount (4) and radiator (1) on front mount bracket (9) with washer (3), spacer
screw (II),
two washers (31, and locknut (2). Tighten locknut (2) to 30 lb-ft (41 N-m).
(101, cap-
0’
1
FOLLOW-ON
TASK
Install headlight housing (para. 10-18).
9-5
