TM 9-2320-387-24-l
I 7- 16. RIGHT PARKING BRAKE CABLE REPLACEMENT
This task covers:
a.
Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotve (Appendix B, Item 2)
hIaterials/Parts
Cotter pin (Appendix G, Item 34)
Three lockwashers (Appendix G, Item 206)
Two clips (Appendix G, Item 221
hlanual
References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
l Muffler and catalytic converter removed
(para. 3-49).
l Wheels chocked and parking brake released
(TM 9-2320-387-10).
Maintenance Level
Unit
1.
2.
3.
4.
5.
6.
7.
Remove cotter pin (301, washer (29), clevis pin (271, and brake clevis (28) from rear caliper lever (31).
Discard cotter pin (30).
Remove brake cable clip (1) and parking brake cable sleeve (26) from rear caliper cable bracket (2)
and remove cable assembly (4) from caliper cable bracket (21. Discard cable clip (1).
Remove parking brake cable clip (7) from parking brake cable sleeve (61 and C-beam (9). Disconnect
parking brake cable (41 from parking brake equalizer bar (8). Discard cable clip (71.
Remove two capscrews (121, parking brake cable clamps (51, and parking brake cable assembly (4)
from body (11).
Remove nut (181, lockwasher (171, capscrew (15), washer (161, and parking brake cable clamp (19)
from clamp bracket (23). Discard lockwasher (17).
Remove capscrew (201, lockwasher (211, and parking brake cable clamp (22) from bracket (23).
Discard lockwasher (21).
NOTE
Perform step 7 if replacing clamp bracket.
Remove nut (241, lockwasher (251, capscrew (14), washer (131, and clamp bracket (23) from support
bracket (3). Discard lockwasher (25).
b. Installation
1.
2.
3.
4.
5.
7-46
NOTE
Perform step 1 if clamp bracket was removed.
Install clamp bracket (231 on support bracket (3) with washer (131, capscrew (141, lockwasher (251,
and nut (24).
Slide parking brake cable clamp (22) onto parking brake cable assembly (4) and install on clamp
bracket (23) with lockwasher (21) and capscrew (20).
Slide parking brake cable clamp (19) on parking brake cable assembly (4) and install on clamp
bracket (231 with washer (161, capscrew (151, lockwasher (171, and nut (18).
Install two parking brake cable clamps (5) on parking brake cable assembly (4) and body (11) with
capscrews (12).
Install parking brake cable sleeve (61 on C-beam (9) and parking brake cable (10) to parking brake
equalizer bar (8) with clip (7).
