I
TM 9-2320-387-24-l
7-17. LEFT PARKING BRAKE CABLE/MOUNTING BRACKET REPLACEMENT (Cont’d)
I
1 b. Installation 1
1.
2.
3.
4.
5.
6.
7.
8.
NOTE
Perform step 1 if parking brake cable mounting bracket was
removed.
Install parking brake cable mounting bracket (4) and tailpipe hanger (6) on rear body mount (7)
with two washers (31, capscrews (51, washers (31, two lockwashers (21, and nuts (1).
NOTE
Perform step 2 if clamp bracket was removed.
Install clamp bracket (35) on support bracket (14l.with washer (321, capscrew (371, lockwasher (341,
and nut (33).
Slide parking brake cable clamp (23) onto parking bracket cable assembly (221 and install on clamp
bracket (35) with lockwasher (24) and capscrew (251.
Slide parking brake cable clamp (26) onto parking brake cable assembly (22) and install on clamp
bracket (35) with washer (36), capscrew (381, lockwasher (271, and nut (281.
Install parking brake cable clamp (12) on parking brake cable assembly (22) and parking brake
cable mounting bracket (4) with washer (111, capscrew (131, washer (111, and nut and lockwasher
assembly (10).
Install parking brake cable sleeve (9) on C-beam (29) and parking brake cable (8) on equalizer bar (30)
with clip (31).
CAUTION
Ensure caliper cable bracket is secure with no signs of looseness and
lever is in contact with the caliper cable bracket stop. Damage to
equipment and poor performance will result if not aligned properly.
Install parking brake cable sleeve (9) on rear caliper cable bracket (15) with cable clip (16).
Install brake clevis (20) on rear caliper lever (17) with clevis pin (21), washer (191, and cotter pin (18).
7-50
