TM 9-2320-387-24-l
7-17. LEFT PARKING BRAKE CABLE/MOUNTING BRACKET REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 11
Materials/Parts
Nut and lockwasher assembly
(Appendix G, Item 246)
Five lockwashers (Appendix G, Item 206)
Cotter pin (Appendix G, Item 341
Two clips (Appendix G, Item 22)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment
Condition
l Wheels chocked and parking brake released
(TM 9-2320-387-10).
l Muffler and catalytic converter removed
(para. 3-49).
Maintenance Level
Unit
5.
6.
7.
8.
Remove cotter pin (111, washer (121, clevis pin (14), and brake clevis (13) from rear caliper lever (101.
Discard cotter pin (111.
Remove brake cable clip (9) and parking brake cable sleeve (2) from rear caliper cable bracket (8).
Discard cable clip (91.
Remove parking brake cable clip (231 and parking brake cable sleeve (2) from C-beam (24).
Disconnect parking brake cable (11 from parking brake equalizer bar (22). Discard cable clip (23).
Remove two nut and lockwasher assemblies (31, capscrews (61, washers (41, and brake cable clamp (5)
from mounting bracket (25) and parking brake cable assembly (151. Discard nut and lockwasher
assembly (3).
Remove nut (211, lockwasher (201, capscrew (281, washer (291, and parking brake cable clamp (19)
from bracket (30). Discard lockwasher (20).
Remove capscrew (181,
lo&washer (171, and parking brake cable clamp (16) from bracket (30).
Discard lockwasher (17).
NOTE
Perform step 7 if replacing clamp bracket.
Remove nut (321, lockwasher (311, capscrew (271, washer (261, and clamp bracket (30) from support
bracket (7). Discard lockwasher (31).
NOTE
Perform step 8 if replacing parking cable mounting bracket.
Remove two nuts (331, lockwashers (341, washers (351, capscrews (361, washers (351, mounting
bracket (251, and tailpipe hanger (371 from rear body mount (38). Discard lockwashers (34).
7-48
