TM 9-2320-362-14&P
4-18. EES KIT INSTALLATION (Cont’d)
m. Fan Drive Assembly Removal
NOTE
It may be necessary to apply compressed air to
clutch adapter.
This disengages fan drive clutch
to allow access to socket head screws.
1.
Disconnect fan drive hose (3) from fan drive assembly (1).
2.
Using compressed air adapter assembly (appendix E), apply 30 psi
compressed air to fitting (4) on fan drive assembly (1) to
disengage fan drive clutch,
3.
Align fan drive assembly (1) to allow access to socket head
screws (5).
4.
Remove four socket head screws (5) securing fan drive assembly (1)
to water pump pulley (2) and remove fan drive assembly (1).
4-56
