TM 9-2320-362-14&P
4-10. POWER INTERFACE BOX TERMINAL REPLACEMENT (Cont’d)
i. Terminal 11E5 Removal
1.
Remove two self-locking nuts (1) and washers (2) from terminal
cover (3).
Remove terminal cover (3) from power interface
box (18).
Discard self-locking nut (1).
2.
Remove nut (4), lockwasher (5), and washer (6) from terminal
11E5 (8),
Remove power cable W69 (7) from terminal 11E5 (8).
3.
Remove sixteen screws (16), cover (15), and gasket (14) from power
interface box (18).
Discard gasket (14).
4.
Remove nut (13), lockwasher (12), and washer (11) that secure bus
bar (17) and wire assembly lead (10) to terminal 11E5 (8).
5.
Remove nut (9) from inside terminal 11E5 (8) and remove terminal
11E5 (8).
j. Terminal 11E5 Installation
1.
Apply sealant to area of terminal that contacts power interface
box (18).
2.
Install terminal 11E5 (8) into power interface box (18) and secure
with nut (9).
3.
Secure bus bar (17) and wire assembly lead (10) to terminal
11E5 (8) with washer (11), lockwasher (12), and nut (13).
4.
Install gasket (14) and cover (15) on power interface box (18) and
secure with sixteen screws (16).
5.
Install power cable W69 (7) to terminal 11E5 (8).
Secure with
washer (6), lockwasher (5), and nut (4).
6.
Install terminal cover (3) to power interface box (18) and secure
with two washers (2) and self-locking nuts (1).
4-18
