TM 9-2320-362-14&P
4-10. POWER INTERFACE BOX TERMINAL REPLACEMENT (Cont’d)
g. Terminal 11E4 Removal
1.
Remove two self-locking nuts (1) and washers (2) from terminal
cover (3).
Remove terminal cover (3) from power interface
box (17).
Discard self-locking nut (1).
2.
Remove nut (4), lockwasher (5), and washer (6) from terminal
11E4 (8).
Remove power cable W67 (7) from terminal 11E4 (8).
3.
Remove sixteen screws (15), cover (14), and gasket (13) from power
interface box (17).
Discard gasket (13).
4.
Remove nut (12), lockwasher (11), and washer
bar (16) to terminal 11E4 (8).
5.
Remove nut (9) from inside terminal 11E4 (8)
11E4 (8).
h. Terminal 11E4 Installation
1.
2.
3.
4.
5.
6.
(10) that secure bus
and remove terminal
Apply sealant to area of terminal that contacts power interface
box (17).
Install terminal 11E4 (8) into power interface box (17) and secure
with nut (9).
Secure bus bar (16) to terminal 11E4 (8) with washer (10),
lockwasher (11), and nut (12).
Install gasket (13) and cover (14) on power interface box (17) and
secure with sixteen screws (15).
Install power cable W67 (7) to terminal 11E4 (8). Secure with
washer (6), lockwasher (5), and nut (4).
Install terminal cover (3) to power interface box (17) and secure
with two washers (2) and self-locking nuts (1).
4-16
