TM 9-2320-362-14&P
3-31. POWER INTERFACE BOX REPAIR (Cont’d)
k. Cable W67 Removal
1.
Remove two self-locking nuts (1) and washers (2) from terminal
cover (3).
Remove terminal cover (3) from power interface box (9).
Discard self-locking nuts (l).
2,
Remove nut (4), lockwasher (5), and washer (6) from terminal
11E4 (10),
3.
Remove cable W67 (8) from terminal 11E4 (10).
l. Cable W67 Installation
Install cable W67 (8) onto power terminal 11E4 (10) and secure
with washer (6), lockwasher (5), and nut (4).
2.
Install terminal cover (3) on power interface box (9) and
secure with two washers (2) and self-locking nuts (l).
m. Cable W69 Removal
1.
Remove two self-locking nuts (1) and washers (2) from terminal
cover (3).
Remove terminal cover (3) from power interface box (9).
Discard self-locking nuts (l).
2.
Remove nut (4), lockwasher (5), and washer (6) from terminal
11E5 (11).
3.
Remove cable W69 (7) from terminal 11E5 (11).
n. Cable W69 Installation
1.
Install cable W69 (7) onto power terminal 11E5 (11) and secure
with washer (6), lockwasher (5), and nut (4).
2.
Install terminal cover (3) on power interface box (9) and
secure with two washers (2) and self-locking nuts (1).
3 - 7 8
