TM 9-2320-362-14&P
3-34. 200 AMP ALTERNATOR GROUND STRAP REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual Reference
General mechanics tool kit:
TM 9-2320-280-10
automotive (Item 1, Section III,
TM 9-2320-280-20
Appendix B)
Equipment Condition
Materials/Parts
Hood raised and secured
Copper shield
(TM 9-2320-28-10)
(Appendix C, Item 2)
l Battery ground cable disconnected
(TM 9-2320-280-20)
1.
Remove nut (1) and lockwasher (2) from ground stud (7). Retain lock-
washer (2) for installation.
2.
Remove bolt (8) from upper hole on mounting bracket (6) and remove
ground strap (4).
NOTE
Ensure terminal is clean before connection is made
1.
Apply copper shield sparingly to bolt surface of ground strap (4).
2.
Insert bolt (8) through hole in ground strap (4).
3.
Install bolt (8) and ground strap (4) to upper hole on mounting
bracket (6).
Tighten to 48 lb-ft (65 Nm).
4.
Install ground strap (4) and lead 3B (3) to ground stud (7) and secure
with lockwasher (2) and nut (1).
Tighten nut (1) to 96-144 lb-in.
(11-16 N.m).
FOLLOW-ON TASKS:
Connect battery ground cable (TM 9-2320-280-20).
Lower and secure hood (TM 9-2320-280-10).
3-81