TM 9-2320-362-14&P
3-32. INCANDESCENT LAMP AND LENS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Circuit breaker is off
1.
Remove lens (4) and O-ring (3) from power interface box (l).
2.
Separate lens (4) from incandescent lamp (2).
1.
Install incandescent lamp (2) into lens (4).
Install lens (4) and O-ring (3) on power interface box (l).
2.
FOLLOW-ON TASK:
Turn on circuit breaker.
3-33. 200 AMP ALTERNATOR REPLACEMENT
NOTE
Refer to TM 9-2320-280-20 for replacement of
the 200 amp alternator.
3-80