a. Removal
b. Installation
TM 9-2320-280-20-3
12-76. ARCTIC CURTAIN CHANNEL ASSEMBLY REPLACEMENT (2-MAN CREW)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
M998, M998A1, M1037, M1038, M1038A1,
Four locknuts (Appendix G, Item 74)
M1097, M1097A1, M1097A2
Manual References
Tools
TM 9-2320-280-24P
General mechanics tool kit:
automotive (Appendix B, Item 1)
1. Peel curtain (13) back from fastener tape (7) on channel assembly (8).
2. Open two straps (1) from curtain (13) and channel assembly (8).
3. Remove four capscrews (4), washers (5), and channel assembly (8) from cargo floor (12).
4. Peel and remove fastener tape (7) from channel assembly (8).
5. Remove seal (9) from channel assembly (8).
6. Remove four locknuts (11), washers (10), screws (3), and two footman loops (2) from channel
assembly (8). Discard locknuts (11).
NOTE
1.
2.
3.
4.
5.
6.
Ensure surface is free of dirt and oil before applying adhesive
backing.
Install two footman loops (2) on channel assembly (8) with four screws (3), washers (10), and
locknuts (11).
Install seal (9) into channel assembly (8).
Peel paper backing (6) from fastener tape (7) and install fastener tape (7) on channel assembly
Install channel assembly (8) on cargo floor (12) with four washers (5) and capscrews (4).
Install curtain (13) on channel assembly (8) with two straps (1).
Secure curtain (13) to channel assembly (8) with fastener tape (7).
(8).
12-109
