a. Removal
b. Installation
TM 9-2320-280-20-3
12-79. ARCTIC FOAM INSULATION STRIP REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M998, M998A1, M1037, M1038, M1038A1,
TM 9-2320-280-24P
M1097, M1097A1, M1097A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
1. Peel foam insulation strip (3) from “A” pillar (1).
2. Clean remaining adhesive from “A” pillar surface (1).
NOTE
Ensure “A” pillar surface is free of dirt and oil before applying
foam insulation strip.
1. Peel paper backing (2) from foam insulation strip (3).
2. Install foam insulation strip (3) on “An pillar (1) and press firmly in place.
12-113
