6. Install two top cover flaps (2) on windshield frame (4) with two turnbuttons (3).
a. Removal
b. Installation
TM 9-2320-280-20-3
12-72. ARCTIC TOP COVER ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M998, M998A1, M1037, M1038, M1038A1,
TM 9-2320-280-24P
M1097, M1097A1, M1097A2
Tools
General mechanics tool kit:
automotive (Appendix B, Item 1)
1. Unfasten eleven turnbuttons (8) from top cover (6) and B pillar (7).
2. Unfasten two turnbuttons (9) from top cover flaps (2) and "B" pillar (7).
3. Unfasten six turnbuttons (10) from top cover flaps (2) and horizontal rails (11).
4. Unfasten two turnbuttons (3) from top cover flaps (2) and windshield frame (4).
5. Fold top cover (6) toward front of vehicle and slide front bead (1) of top cover (6) from A pillar
former assembly (5) and remove top cover (6).
1. Install top cover (6) by sliding front bead (1) of top cover (6) into A pillar former assembly (5).
2. Unfold top cover (6) toward rear of vehicle.
3. Install top cover flaps (2) on horizontal rails (11) with six turnbuttons (10).
4. Install top cover flaps (2) on B pillar (7) with two turnbuttons (9).
5. Install top cover (6) on B pillar (7) with eleven turnbuttons (8).
12-105