a. Removal
b. Installation
TM 9-2320-280-20-3
12-70. SWINGFIRE WINDSHIELD WASHER PUMP HARNESS EXTENSION REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M966, M966A1, M996, M996A1, M997,
TM 9-2320-280-10
M997A1, M997A2, M998, M998A1, M1025,
TM 9-2320-280-24P
M1025A1, M1025A2, M1037, M1038, M1038A1 Equipment Condition
Tools
• Battery ground cable disconnected (para. 4-73).
General mechanic’s tool kit:
• Hood raised and secured (TM 9-2320-280-10).
automotive (Appendix B, Item 1)
Materias/Parts
Tiedown strap (Appendix G, Item 239)
NOTE
Prior to removal, tag leads for installation.
1. Remove tiedown strap (8) from harness extension (7) and protective control box wiring
harness (9). Discard tiedown strap (8).
2. Disconnect leads 71C (3) and 57D (6) from windshield washer pump leads 71C (2) and 57D (1).
3. Disconnect leads 71C (3) and 57D (6) from body wiring harness (4) under dash panel.
4. Pull harness extension (7) out through cowl (5) and remove harness extension (7) from vehicle.
1. Guide harness extension (7) through cowl (5).
2. Connect leads 71C (3) and 57D (6) to body wiring harness (4) under dash panel.
3. Connect leads 57D (6) and 71C (3) to windshield washer pump leads 71C (2) and 57D (1).
4. Install harness extension (7) on protective control box wiring harness (9) with tiedown strap (8).
FOLLOW-ON TASKS: • Lower and secure hood (TM 9-2320-280-10).
• Connect battery ground cable (para. 4-73).
12-103
