TM 9-2320-280-20-3
10-27. RIGHT FRONT COWL INSULATION REPLACEMENT
This task covers:
a. Removal
b. Installation
lNITIAL SETUP
Tools
Manual References
General mechanic’s tool kit
TM 9-2320-280-24P
automotive (Appendix B, Item 1)
Equipment Condition
Materials/Parts
Heater assembly removed (para. 10-87).
Four locknuts (Appendix G, Item 58)
Remove four locknuts (6), capscrews (3), washers (2), retainer (1), and insulation (5) from floor (7).
Discard locknuts (6).
1. Install insulation (5) and retainer (1) on floor (7) with four washers (2), capscrews (3), and locknuts (6).
Tighten capscrews (3) to 6 lb-ft (8 N-m).
2. Press insulation (5) into place on cowl (4).
FOLLOW-ON TASK: Install heater assembly (para. 10-87).
10-47
