10-26. LEFT FRONT COWL INSULATION REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Remove two nuts (1), capscrews (5), lockwashers (4), and clamps (3) from wiring harness (2),
insulation (9), and body (6). Discard lockwashers (4).
2.
Remove four locknuts (12), capscrews (7), washers (8), retainer (10), and insulation (9) from floor (11).
Discard locknuts (12).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Four locknuts (Appendix G, Item 58.1)
Two lockwashers (Appendix G, Item 108)
Manual References
TM 9-2320-280-24P
Equipment Condition
Headlight beam selector switch removed
(para. 4-58).
b. Installation
1.
Install insulation (9) and retainer (10) on floor (11) with four washers (8), capscrews (7), and
locknuts (12). Tighten capscrews (7) to 6 lb-ft (8 N•m).
2.
Install wiring harness (2) and insulation (9) on body (6) with two clamps (3), capscrews (5),
lockwashers (4), and nuts (1).
FOLLOW-ON TASK: Install headlight beam selector switch (para. 4-58).
TM 9-2320-280-20-3
10-46
Change 1
