TM 9-2320-280-20-3
I
11-215. AMBULANCE SPREADER BAR MAINTENANCE
This task covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP:
Applicable Models
Manual References
M996, M996A1, M997, M997A1, M997A2
TM 9-2320-280-24P
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
1. Remove three pins (3) and extension bar (1) from ambulance.
2. Remove two links (7) from extension bar (1).
b. Disassembly
1. Remove six ferrules (2) and three cables (4) from extension bar (1) and three pins (3).
2. Disconnect two cable assemblies (6) from links (7).
3. Disconnect two snap hooks (5) from cable assemblies (6).
c. Assembly
1. Connect two snap hooks (5) to cable assemblies (6).
2. Connect two cable assemblies (6) to links (7).
3. Install six ferrules (2) and three cables (4) on extension bar (1) and three pins (3).
1. Install two links (7) on extension bar (1).
2. Install extension bar (1) on ambulance with three pins (3).
11-325/(11-326 blank)
