TM 9-2320-280-20-3
11-72. TRAVERSING UNIT MOUNT ADAPTER MAINTENANCE
This task covers:
a. Disassembly
b. Assembly
INITIAL SETUP:
Applicable Models
Manual References
M966, M966A1, M1036, M1045, M1045A1,
TM 9-1425-450-12
M1045A2, M1046, M1046A1
TM 9-1425-472-12
Tools
TM 9-2320-280-24P
General mechanic’s tool kit
Equipment Condition
automotive (Appendix B, Item 1)
Traversing unit mount adapter removed
Materials/Parts
(TM 9-1425-450-12, TM 9-1425-472-12).
Six locknuts (Appendix G, Item 58)
NOTE
. Upper coupling clamp and lower coupling clamp are removed
and installed the same. This procedure covers the upper
coupling clamp.
. Note position of coupling clamp for installation.
a. Disassembly
Remove six locknuts (3), washers (4), capscrews (5), three retainers (6), and coupling clamp (1) from
traversing unit mount adapter (2). Discard locknuts (3).
Install coupling clamp (1) on traversing unit mount adapter (2) with three retainers (6), capscrews (5),
washers (4), and locknuts (3). Tighten locknuts (3) to 6 lb-ft (8 N-m).
FOLLOW-ON TASK: Install traversing unit mount adapter (TM 9-1425-450-12, TM 9-1425-472-12).
11-103
