TM 9-2320-280-20-3
11-74. M16 AMMO RACK ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M966, M966A1, M1036, M1045, M1045A1,
M1045A2, M1046, M1046A1
Tools
General mechanics tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Six locknuts (Appendix G, Item 58)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Rear end of cargo shell door raised
(TM 9-2320-280-10).
1. Remove four locknuts (7), washers (6), two reinforcement brackets (5), and four screws (4) from M16
ammo rack (2) and wheelhouse (1). Discard locknuts (7).
2. Remove two locknuts (8), washers (9), reinforcement brackets (10), screws (3), and M16 ammo
rack (2) from wheelhouse (1). Discard locknuts (8).
1. Install M16 ammo rack (2) on wheelhouse (1) with two screws (3), reinforcement brackets (10),
washers (9), and locknuts (8).
2. Secure M16 ammo rack (2) to wheelhouse (1) with four screws (4), twO reinforcement brackets (5),
four washers (6), and locknuts (7).
3. Tighten locknuts (7) and (8) to 6 lb-ft (8 N=m).
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).
11-106