TM 9-2320-280-20-3
11-68. CABLE STOWAGE CLEAT REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M966, M966A1, M1036, M1045, M1045A1,
TM 9-2320-280-24P
M1045A2, M1046, M1046A1
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
NOTE
The cable stowage cleat for vehicles with serial numbers 100,000
and above is located behind the companion seat. Removal and
installation procedures are basically the same.
1. Uncoil TOW wiring harness (1) and MGS power cable (2) from cable stowage cleat (6).
2. Remove two capscrews (4), washers (5), and cable stowage cleat (6) from support assembly (3).
1. Install cable stowage cleat (6) on support assembly (3) with twO washers (5) and capscrews (4).
Tighten capscrews (4) to 6 lb-ft (8 N.m).
2. Coil TOW wiring harness (1) and MGS power cable (2) around cable stowage cleat (6).
11-98
