TM 9-2320-280-20-3
11-70. STOWAGE MOUNT BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M966, M966A1, M1036, M1045, M1045A1,
M1045A2, M1046, M1046A1
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 106)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-280-24P
Equipment Condition
l Stowage pedestal removed (para. 11-71).
l Fuel tank removed (para. 3-24).
1. Remove two locknuts (5), washers (4), capscrews (17), and washers (4) from stowage mount
bracket (3) and support bracket (12). Discard locknuts (5).
2. Remove capscrew (8), washer (9), and tiedown (10) from stowage bracket (3) and cargo floor (16).
3. Slide plate (18) in “B” beam (14) to allow access to nut (13).
4. Remove nut (13), capscrew (6), and washer (7) from stowage bracket (3), spacer (11), and cargo
floor (16).
5. Remove nut (15), capscrew (2), washer (1), stowage bracket (3), and spacer (11) from cargo floor (16).
1. Install spacer (11) and stowage bracket (3) on cargo floor (16) with washer (1), capscrew (2),
and nut (15). Tighten capscrew (2) to 37 lb-ft (50 N.m).
2. Install stowage bracket (3) on cargo floor (16) with washer (7), capscrew (6), and nut (13). Tighten
capscrew (6) to 37 lb-ft (50 Nom).
3. Close plate (18) in “B” beam (14).
4. Secure stowage bracket (3) and tiedown (10) to cargo floor (16) with washer (9) and capscrew (8).
Tighten capscrew (8) to 75 lb-ft (102 N-m).
5. Install stowage bracket (3) on support bracket (12) with two washers (4), capscrews (17),
washers (4), and locknuts (5). Tighten locknuts (5) to 6 lb-ft (8 N-m).
11-100
