TM 9-2320-280-20-3
11-43. WEAPON STATION HATCH HANDLE REPLACEMENT
This task covers:
a. Removal
b. installation
INITIAL SETUP:
Applicable Models
Materials/Parts
All models except M996, M996A1, M997,
Two locknuts (Appendix G, Item 58)
M997A1, M997A2, M998, M998A1, M1035,
M1035A1, M1035A2, M1037, M1038, M1038A1,
Manual References
M1042, M1097, M1097A1, M1097A2
TM 9-2320-280-24P
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Remove two locknuts (1), washers (2), capscrews (5), large washers (4), and handle (6) from hatch (3).
Discard locknuts (1).
Install handle (6) on hatch (3) with two large washers (4), capscrews (5), washers (2), and locknuts (1).
Tighten locknuts to 6 lb-ft (8 N.m).
11-63
