TM 9-2320-280-20-3
I
11-39. RIGHT WHEELHOUSE ARMOR PLATE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M1025, M1025A1, M1025A2, M1026,
M1026A1, M1043, M1043A1, M1043A2,
M1044, M1044A1, M1045, M1045A1,
M1045A2, M1046, M1046A1
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Fourteen locknuts (Appendix G, Item 58)
Sound dampener (Appendix G, Item 228)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
l Rear end of cargo shell door raised
(TM 9-2320-280-10).
M1045, M1045A1, M1045A2, M1046, and M1046A1
only
l Night sight support assembly removed (para. 11-82).
M1043, M1043A1, M1043A2, M1044, and M1044A1
only
l Machine gun stop removed (para. 11-100).
a. Removal
1. Remove four locknuts (7), washers (6), screws (9), and two footman loops (8) from wheelhouse (3).
Discard locknuts (7).
2. Remove ten locknuts (5), washers (4), capscrews (10), washers (4), armor plate (1), and sound
dampener (2) from wheelhouse (3). Discard locknuts (5) and sound dampener (2).
3. Clean armor plate (1) to remove adhesive.
I
b. Installation
1. Peal paper backing (11) from sound dampener (2) and install sound dampener (2) on armor plate (1).
2. Install armor plate (1) on wheelhouse (3) with ten washers (4), capscrews (10), washers (4), and
locknuts (5). Tighten capscrews (10) to 6 lb-ft (8 N~m).
3. Install two footman (8) on wheelhouse (3) with four screws (9), washers (6), and locknuts (7).
11-58
