TM 9-2320-280-20-3
11-17. CARGO SHELL DOOR LATCH MAINTENANCE
This task covers:
a. Removal
c. Adjustment
b. Installation
INITIAL SETUP
Applicable Models
All models except M996, M996A1, M997,
M997A1, M997A2, M998, M998A1, M1035,
M1035A1, M1035A2, M1037, M1038,
M1038A1, M1042, M1097, M1097A1, M1097A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Three lockwashers (Appendix G, Item 109)
Pushnut (Appendix G, Item 169)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Rear end of cargo shell door raised
(TM 9-2320-280-10).
1. Remove pushnut (6), rod end clip (7), and rod (8) from door latch (4). Discard pushnut (6).
2. Remove three nuts (1), lockwashers (2), capscrews (5), and door latch (4) from cargo door (3). Discard
lockwashers (2).
I
b. Installation
Install door latch (4) on cargo door (3) with three capscrews (5), lockwashers (2), and nuts (1). DO not
tighten nuts (1) all the way.
I
c. Adjustment
I
1. Loosen three nuts (1) from door latch (4) and cargo door (3).
2. Close cargo door (3) ensuring latch (4) is fully engaged on door striker pins (9).
3. Tighten three nuts (1) to 17 lb-ft (23 Nom).
4. Install rod (8) on latch (4) with rod end clip (7) and pushnut (6).
FOLLOW-ON TASKS: l Lubricate door latch (TM 9-2320-280-10).
l Check cargo shell door for proper operation (TM 9-2320-280-10).
11-29
