TM 9-2320-280-20-3
11-16. CARGO SHELL DOOR HANDLE LATCH REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Applicable Models
All models except M996, M996A1, M997,
M997A1, M997A2, M998, M998A1, M1035,
M1035A1, M1035A2, M1037, M1038,
M1038A1, M1042, M1097, M1097A1, M1097A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two pushnuts (Appendix G, Item 169)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Forward end of cargo shell door raised
(TM 9-2320-280-10).
a. Removal
1. Remove four nuts (4), washers (3), capscrews (5), and washers (3) from handle latch lock (1) and
cargo door (2).
2. Pull handle latch (1) out and down until latch rods (6) are visible.
3. Remove two pushnuts (9), rod end clips (7), latch rods (6), and handle latch (1) from pivot arms (8).
Discard pushnuts (9).
1. Position handle latch (1) to cargo door (2) until latch rods (6) can be connected to handle latch pivot
arms (8) and secure latch rods (6) on pivot arms (8) with two rod end clips (7) and push-nut-s (9).
2. Install handle latch (1) on cargo door (2) with four washers (3), capscrews (5), washers (3), and
nuts (4).
FOLLOW-ON TASK: Check cargo shell door for proper operation (TM 9-2320-280-10).
11-28
