TM 9-2320-280-20-3
11-14. CARGO SHELL DOOR WIRE HANDLE LOCK REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
All models except M996, M996A1, M997, M997A1,
M997A2, M998, M998A1, M1035, M1035A1,
M1035A2, M1037, M1036, M1038A1, M1042,
M1097, M1097A1 M1097A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Sealing compound (Appendix C, Item 45)
Two pushnuts (Appendix G, Item 169)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Tailgate lowered (TM 9-2320-280-10).
a. Removal
1. Remove two pushnuts (1), rod end clips (2), and latch rods (3) from wire handle lock pivot
arms (4). Discard pushnuts (1).
2. Remove four nuts (5), washers (6), capscrews (8), washers (6), and wire handle lock (9) from cargo
door (7).
I
b. Installation
I
1. Apply sealing compound to threads of capscrews (8).
2. Install wire handle lock (9) on cargo door (7) with four washers (6), capscrews (8), washers (6), and
nuts (5).
3. Install two latch rods (3) on wire handle lock pivot arms (4) with rod end clips (2) and pushnuts (1).
FOLLOW-ON TASKS: c Raise and secure tailgate (TM 9-2320-280-10).
l Check cargo shell door for proper operation (TM 9-2320-280-10).
11-26
