TM 9-2320-280-20-3
11-20. CARGO SHELL DOOR RETENTION CABLE REPLACEMENT
This task covers:
a Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
All models except M996, M996A1, M997,
Two locknuts (Appendix G, Item 65)
M997A1, M997A2, M998, M998A1, M1035,
Manual References
M1035A1, M1035A2, M1037, M1038, M1038A1,
M1042, M1097, M1097A1, M1097A2
TM 9-2320-280-10
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanic’s tool kit:
F’orward end of cargo shell door raised
automotive (Appendix B, Item 1)
(TM 9-2320-280-10).
NOTE
It will be necessary to lower cargo shell door slightly to relieve
cable tension during step 1.
1. Remove locknut (1), washer (2), shoulder bolt (4), and spring end of cable (5) from cargo door
bracket (3). Discard locknut (1).
2. Remove locknut (8), washer (9), shoulder bolt (6), and cable (5) from left cargo shell bracket (7).
Discard locknut (8).
I
b. Installation
I
1. Install cable (5) on cargo shell bracket (7) with shoulder bolt (6), washer (9), and locknut (8).
Tighten locknut (8) to 85-110 lb-in. (10-12 N-m).
2. Install spring end of cable (5) on cargo door bracket (3) with shoulder bolt (4), washer (2), and
and locknut (1). Tighten locknut (1) to 85-110 lb-in. (10-12 Nom).
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).
11-34
