TM 9-2320-280-20-3
10-186.4
Change 1
10-108.1. 10,500 LB HYDRAULIC WINCH AND BRACKETS REPLACEMENT (Cont’d)
NOTE
• Brackets may not require replacement. Replace brackets only
when damaged.
• The left and right side brackets are removed the same. This
procedure covers the right side.
Remove three locknuts (7), washers (4), screws (5), washers (4), bracket (3), washer (2), and washer (1)
from frame (6). Discard locknuts (7).
Install washer (1), washer (2), and bracket (3) on frame (6) with three washers (4), screws (5), washers
(4), and locknuts (7). Tighten locknuts (7) to 189 lb-ft (256 N•m).
d. Brackets Installation
c. Brackets Removal
