TM 9-2320-280-20-3
10-107. 6,000 LB. WINCH REPLACEMENT (Cont’d)
b. Installation
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Install clamp (8) on power cables (15) at same distance from clamp (17) on winch (16) that was
recorded in removal.
Install clamp (8) and bracket (6) on power cables (15) with capscrew (9), lockwasher (3), and nut (4).
Install winch (16) on front bumper (29) with four nuts (23), washers (22), and capscrews (21).
Tighten capscrews (21) to 60 lb-ft (81 N.m).
Route cable (24) through opening (28) in control box (27) and connect to control cable (26). Install
grommet (25) in opening (28).
Route power cables (15) in approximate mounting location in vehicle.
Install lead 7 (40) on starter terminal (37) with lockwasher (39) and nut (38). Tighten nut (38) to
15 lb-ft (20 N.m).
Install lead 6 (33) on starter terminal (34) with lockwasher (35) and nut (36). Tighten nut (36) to
25 lb-ft (34 N9m).
Install clamp (32) and power cables (15) on oil pan bracket screw (31) with nut and lockwasher
assembly (30).
Install clamp (10) on power cables (15) and airlift bracket (7) with capscrew (11).
Install bracket (6) on airlift bracket (7) with capscrew (5).
Install clamp (1) on power cables (15) and frame bracket (18) with capscrew (2), lockwasher (20), and nut (19).
Connect vent line (12) to fitting (13) on winch (16). Install vent line (12) on power cables (15) with
three tiedown straps (14).
10-182
