10-68. M11 DECONTAMINATION BRACKETS INSTALLATION
This task covers:
Installation
Installation
INITIAL SETUP:
Applicable Models
M966, M966A1, M998, M998A1, M1025,
M1025A1, M1025A2, M1026, M1026A1,
M1036, M1037, M1038, M1038A1, M1042,
M1121
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
TM 9-2320-280-20-3
10-112
Change 1
NOTE
Perform steps 1 and 2 for models M966, M966A1, and M1036 vehicles only.
1.
Using bracket (2) as a template, locate, mark, and drill four 0.281-inch (7.14 mm) diameter holes (1)
in right wheel housing (4).
2.
Install bracket (2) on right wheel housing (4) with four washers (3), screws (5), washers (3), and
nuts (6).
NOTE
Perform steps 3 and 4 for models M998, M998A1, M1038, and M1038A1
vehicles only.
3.
Using bracket (9) as a template, locate, mark, and drill four 0.281-inch (7.14 mm) diameter
holes (10) in left wheel housing (11).
4.
Install bracket (9) on left wheel housing (11) with four washers (7), screws (8), washers (7), and
nuts (12).
NOTE
The following procedure is for initial installation of apparatus (P/N D5-
51-269). This apparatus is not included in TM 9-2320-280-24P.
