TM 9-2320-280-20-3
D-104
Change 1
Figure D-113. Test Module Assembly (Cont’d).
Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont'd)
INSTRUCTIONS (CONT’D):
21. Connect wire marked 1 on bussed resistor network to black (–) wire marked 1 on LED.
22. Connect wire marked 2 on bussed resistor network to black (–) wire marked 2 on LED.
23. Connect wire marked 3 on bussed resistor network to black (–) wire marked 3 on LED.
24. Connect wire marked 4 on bussed resistor network to black (–) wire marked 4 on LED.
25. Connect wire marked 5 on bussed resistor network to black (–) wire marked 5 on LED.
26. Connect wire marked 8 on bussed resistor network to black (–) wire marked 8 on LED.
27. Connect wire marked 9 on bussed resistor network to black (–) wire marked 9 on LED.
28. Connect wire marked 10 on bussed resistor network to black (–) wire marked 10 on LED.
29. Connect wire marked 11 on bussed resistor network to black (–) wire marked 11 on LED.
30. Connect wire marked 12 on bussed resistor network to black (–) wire marked 12 on LED.
