TM 9-2320-280-20-2
9-3. FRONT BUMPER AND TOWING BRACKETS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
M1026, M1026A1, M1036, M1038, M1038A1,
Six locknuts (Appendix G, Item 66)
M1042, M1044, M1044A1, M1046, M1046A1
Manual References
Tools
TM 9-2320-280-24P
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Equipment Condition
Winch removed (para. 10-107).
1. Remove four locknuts (3), washers (4), capscrews (5), washers (4), and two towing brackets (6)
from front bumper (1) and two frame extensions (2). Discard locknuts (3).
2. Remove two locknuts (3), washers (4), capscrews (5), and washers (4) from front bumper (1) and
frame extensions (2). Discard locknuts (3).
3. Remove two capscrews (7), washers (8), and front bumper (1) from frame extensions (2).
b. Installation
1. Install front bumper (1) on two frame extensions (2) with two washers (8) and capscrews (7).
Tighten capscrews (7) to 90 lb-ft (122 N m).
2. Install front bumper (1) on two frame extensions (2) with two washers (4), capscrews (5),
washers (4), and locknuts (3). Tighten locknuts (3) to 90 lb-ft (122 N m).
3. Install two towing brackets (6) on front bumper (1) with four washers (4), capscrews (5), washers (4),
and locknuts (3). Tighten locknuts (3) to 90 lb-ft (122 N m).
FOLLOW-ON TASK: Install winch (para. 10-107).
9-3
