TM 9-2320-280-20-2
6-14. GEARED HUB SPINDLE BEARING ADJUSTMENT (Cont’d)
NOTE
Immediately install steering arm cover after application of sealant.
10. Clean sealing surfaces on geared hub (1) and steering arm cover (5). Apply anaerobic sealant to
steering arm cover (5) and install steering arm cover (5) on geared hub (1).
11. Apply sealing compound to threads of capscrew (7) and install steering arm cover (5) on geared
hub (1) with four washers (6) and capscrews (7). Tighten capscrews (7) to 65 lb-ft (88 N·m).
12. Remove fill plug (2) and washer (3) from geared hub (1).
13. Fill geared hub (1) to proper oil level (TM 9-2320-280-10).
14. Install washer (3) and fill plug (2) on geared hub (1). Tighten fill plug (2) to 8-13 lb-ft (11-18 N·m).
FOLLOW-ON TASK: Install wheel (para. 8-3.)
6-39
