TM 9-2320-280-20-2
6-9. HALFSHAFT MAINTENANCE (Cont’d)
6.
7.
8.
9.
10.
NOTE
Remove excess grease from bearing assembly and separate
ball race from inner race.
Perform steps 6 through 8 for all models except the M1097, “A1”
and “A2” vehicles.
Peform steps 9 and 10 for M1097, “A1” and “A2” series vehicles.
Pry spacer (3) from groove on shaft (5) and slide spacer (3) and inner race (2) up on shaft (5).
Remove retainer ring (1) from shaft (5). Discard retainer ring (1).
Remove inner race (2), spacer (3), and ball race (4) from shaft (5). Discard spacer (3).
Remove retainer ring (6) from shaft (5). Discard retainer ring (6).
Remove inner race (2) and ball race (4) from shaft (5).
6-19
