TM 9-2320-280-20-2
5-9. SHIFT CONTROLS HOUSING ASSEMBLY (SF-5583581) REPAIR (Cont’d)
1. Inspect shift controls housing (7) for damage. Replace shift controls housing assembly if damaged.
2. Inspect transmission shift tube (28), bracket and shaft assembly (21), transmission shift lever (20),
bezel (1), and shift lever latch rod (25) for damage. Replace if damaged.
3. Inspect wiper (5) for tears. Replace if torn.
4. Inspect shift lever latch spring (24) and shift control compression spring (17) for distortion or damage.
Replace if distorted or damaged.
5. Inspect nylon flanged bearings (22) and (13) for damage. Replace if damaged.
6. Inspect shift control shaft (23), spring retaining collar (15) and shift lever (14) for damage. Replace if
damaged.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
5-24
Install bearing (6) in shift controls housing (7).
Apply thin coat of adhesive between shift controls housing assembly (7) and wiper (5).
Position wiper (5) and three washers (4) on shift controls housing (7).
Install bezel (1) on shift controls housing (7) with three washers (3), capscrews (2), washers (8), and
locknuts (9).
Install shift lever latch rod (25) by pushing up into transmission shift tube (28).
Position transmission shift lever (20), shift lever latch spring (24), and transmission shift tube (28) to
bracket and shaft assembly (21) and secure with four washers (19), capscrews (18), lockwashers (27),
and nuts (26).
Install transmission shift tube (28) by pushing UP through shift controls housing (7) and install nylon
flanged bearing (22) into bracket and shaft assembly (21).
Install transfer shift lever (10) in transfer shift lever arm (14) with spring pin (11).
Install transfer shift lever (10) by pushing up through shift controls housing (7) and install two nylon
flanged bearings (13) in transfer shift lever arm (14).
Position shift control compression spring (17) and spring collar (15) into shift controls housing (7).
Install shift control shaft (23) through shift controls housing (7), bracket and shaft assembly (21), com-
pression spring (17), spring retaining collar (15), transfer shift lever arm (14), and out of shift controls
housing (7).
Secure shift control shaft (23) in shift controls housing (7) with retaining ring (12).
Secure spring retaining collar (15) on shift control shaft (23) with spring pin (16).
