TM 9-2320-280-20-2
4-112. 200 AMPERE ALTERNATOR CABLE (12339317) REPLACEMENT (Cont’d)
3.
4.
5.
6.
7.
8.
9.
Install clamp (13) and cable (8) on water crossover stud (14) with lockwasher (12) and nut (11).
Install clamp (17) on cable (8) and engine lift bracket (1) with lockwasher (16) and nut (15).
Install clamp (22) on cable (8) and secure clamp (21) to compressor (18) with lockwasher (20) and nut (19).
NOTE
Step 6 applies to M997 and M997A1 vehicles only. Step 7 applies
to M996 and M996A1 vehicles only.
Install clamps (28), (27), and (25) on cable (8) and oil pan bracket (26) with bolt (29), lockwasher (23),
and nut (24).
Install clamp (28) on cable (8) and oil pan bracket (26) with bolt (29), lockwasher (23), and nut (24).
Install cable (8) on starter positive post (33) with lockwasher (32) and nut (31). Connect tiedown strap (30).
Apply sealant to starter positive post (33) and cable (8) so that all exposed metallic surfaces are
coated. The sealant should be evenly applied with a minimum thickness of .12 in. (3 mm).
FOLLOW-ON TASKS: Lower and secure hood (TM 9-2320-280-10).
Connect battery ground cable (para. 4-73).
Start engine and check operation of voltmeter gauge (TM 9-2320-280-10)
4-265
