TM 9-2320-280-20-2
4-84. HOOD WIRING HARNESS REPLACEMENT (Cont’d)
b. Installation
1.
2.
3.
4.
5.
6.
Position harness (21) on hood (5) in approximate mounting position.
CAUTION
Use care when routing harness. Failure to do so will cause
damage to harness.
Insert harness (21) and grommets (24) through opening in hood (5).
Connect harness leads 17E (22), 18C (23), and 91D (25) at left headlight connetors (26).
Connect harness leads 17F (22), 18D (23), and 91C (25) at right headlight connectors (26).
Secure harness (21) to hood (5) with three washers (29), clamps (28), and screws (27). Finger tighten
screws (27).
Secure harness (21) to hood (5) with two screw and washer assemblies (19) and clamps (20). Finger
tighten screw and washer assemblies (19).
4-149
