TM 9-2320-280-20-2
4-84. HOOD WIRING HARNESS REPLACEMENT
This task covers:
a. Removal
c. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-10
automotive (Appendix B, Item 1)
TM 9-2320-280-24P
Materials/Parts
Equipment Condition
Two locknuts (Appendix G, Item 60)
Blackout drive light assembly removed (para. 4-50).
Two lockwashers (Appendix G, Item 110)
Side marker light lenses and lamp removed
Antiseize compound (Appendix C, Item 13)
(para. 4-54).
NOTE
Prior to removal, tag leads for installation.
a. Removal
1.
2.
3.
4.
5.
6.
7.
4-146
Disconnect connector plug (2) from connector receptacle (1).
Remove four capscrews (7) and washers (6) from left cover plate (5) and hood (3).
Remove two clips (4) from cover plate (5) and remove cover plate (5).
Disconnect harness leads 489C (16) from left side marker light terminal (15).
Disconnect harness leads 20E (9), 461B (20), and 491C (19) from three left composite light terminals
(8).
Remove locknut (12), screw (11), and left side marker light ground 92C (10) from hood (3). Discard
locknut (12).
Remove capscrew (14), lockwasher (13), and left composite light ground 92B (17) from bus bar (18).
Discard lockwasher (13).
