TM 9-2320-280-20-2
4-84. HOOD WIRING HARNESS REPLACEMENT (Cont’d)
8. Remove three capscrews (1) and washers (2) from right cover plate (3) and hood (5).
9. Remove two clips (4) from cover plate (3) and remove cover plate (3).
10. Disconnect harness lead 489D (6) at right side marker light terminal (7).
11. Disconnect harness leads 20F (14), 460B (15), and 491D (16) at right composite light terminals (13).
12. Remove locknut (10), screw (12), and right side marker light ground 92D (11) from hood (5). Discard
locknut (10).
13. Remove capscrew (9), lockwasher (8), and right composite light ground 92A (18) from bus
bar (17). Discard lockwasher (8).
14. Disconnect harness leads 17E (22), 18C (23), and 91D (25) at left headlight connectors (26).
15. Disconnect harness leads 17F (22), 18D (23), and 91C (25) at right headlight connectors (26).
16. Remove three capscrews (27), clamps (28), washera (29), and harness (21) from hood (5).
17. Remove two screw and washer assemblies (19), clamps (20), and harness (21) from hood (5).
CAUTION
Use care when removing harness. Failure to do so will cause
damage to harness.
18. Remove grommets (24) and harness (21) from hood (5).
4-148
