TM 9-2320-280-20-2
4-75. 12 VOLT ALTERNATOR CABLE REPLACEMENT (Cont’d)
b. Installation
1. Position cable (1) in approximate mounting location on engine (5) and through hole in battery
box (16).
2. Install cable (13), leads (12), and cable (1) on terminal clamp (14) with screw (11) and nut (15).
3. Install two tiedown straps (10) on cable (1).
4. Install cable (1) and clamp (4) on bracket (2) with capscrew (3).
5. Install cable (1) on regulator (6) with washer (7) and nut (8). Tighten nut (8) to 18-22 lb-in.
2.0-2.5 N·m). lide rubber boot (9) over nut (8).
FOLLOW-ON TASKS:
4-126
Lower and secure hood (TM 9-2320-280-10).
Connect battery ground cables (para. 4-73).
Install engine access cover (para. 10-15).
