TM 9-2320-280-20-2
4-33. ENGINE RPM SENSOR REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
M997A2, M1025A2, M1035A2, M1043A2,
TM 9-2320-280-10
M1045A2, M1097A2
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanic’s tool kit:
Battery ground cable disconnected (para. 4-73).
automotive (Appendix B, Item 1)
Hood raised and secured (TM 9-2320-280-10).
a. Removal
1. Disconnect engine harness leads (1) from RPM sensor leads (2).
2. Remove capscrew (3) and RPM sensor (4) from front cover (5).
b. Installation
1. Install RPM sensor (4) in front cover (5) with capscrew (3).
2. Connector RPM sensor leads (2) to engine harness leads (1).
FOLLOW-ON TASKS:
Connect battery ground cable (para. 4-73)
Lower and secure hood (TM 9-2320-280-10)
4-55
