TM 9-2320-280-20-2
4-32. RPM SENSOR REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
All vehicles except: M997A2, M1025A2,
TM 9-2320-280-24P
M1035A2, M1043A2, M1045A2, M1097A2
Equipment Condition
Tools
Engine access cover removed (para. 10-15).
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
a. Removal
1. Disconnect harness connector (5) from RPM sensor connector (4).
2. Loosen nut (2) and remove RPM sensor (1) from oil pump drive (6).
b. Installation
1. Align tab (3) on RPM sensor (1) with slot (7) in oil pump drive (6). Install RPM sensor (1) on oil
pump drive (6) with nut (2).
2. Comect RPM sensor connector (4) to harness connector (5).
FOLLOW-ON TASK: Install engine access cover (para. 10-15).
4-54
